Maintenance Margin Rate vs Margin Ratio: Two Numbers, One Name
"Maintenance margin rate" and "maintenance margin ratio" sound like one thing, and plenty of traders read one as the other. On a futures exchange they are two different numbers. The rate lives in the risk-limit table — figures like 0.30% or 0.45% — and lower means a looser rule. The ratio lives on your open position — a figure like 212.64% — and higher means more room; as it sinks toward 100%, liquidation gets close. The rate helps set the bottom of the ratio's fraction, so the two move in opposite directions.
Read the wrong one, and here's the bill
The two mix-ups don't cost the same.
Mistake one: you treat the position ratio like a tier rate. Tier rates are better when they're low, so a ratio sliding from, say, 300% to 150% looks like progress. It isn't. It's heading for the line where your margin no longer covers the maintenance margin, and Gate's help article is plain about what happens there: "When the account margin falls below the required maintenance margin... liquidation is triggered."
Mistake two is quieter. You remember that BTCUSDT's first tier is 0.30% and multiply a 1,800,000 USDT position by it. That gives 5,400 USDT. Worked out tier by tier, the requirement is 6,600 USDT — 1,200 more than you budgeted for (the arithmetic is two sections down). Underestimate the maintenance margin and the liquidation level in your head sits further away than the real one.
I worry more about the second, because the error points toward feeling safe.
The small number: the tier rate
Gate defines maintenance margin as "the minimum amount required to keep the position from being liquidated," and says the amount "is calculated using a tiered algorithm." Your position's value lands in a band of the risk-limit table, and each band carries its own maintenance margin rate. Bigger bands, higher rates.
Here is what Gate's public API returned for BTC_USDT on the day this was written, up to the fifth tier:
| Tier | Position up to (USDT) | Maint. margin rate | Max leverage |
|---|---|---|---|
| 1 | 500,000 | 0.30% | 200x |
| 2 | 1,000,000 | 0.35% | about 150x |
| 3 | 1,500,000 | 0.40% | 125x |
| 4 | 2,000,000 | 0.45% | about 110x |
| 5 | 3,000,000 | 0.50% | 100x |
Table note: snapshot of Gate's public BTC_USDT risk-limit tiers, checked October 2026. The live figures on Gate's contract information page are the ones that count.
A position under 500,000 USDT only ever touches tier one. And the table can move: Gate's Chinese-language contract information page lists adjusting maximum leverage, risk limits and tier maintenance margin rates among the measures it may take in extreme markets. Other contracts have their own tables, so BTCUSDT's figures tell you nothing about an altcoin pair. Gate's English help article puts the practical point in one line about the risk limit: "Be sure to check it before opening a position."
Tiers stack, they don't jump
A common assumption is that once a position crosses 500,000 USDT, the whole thing moves to the tier-two rate. It doesn't. Each slice of the position pays the rate of the band it falls in. The help article shows this with a made-up table (tier one up to 20,000 at 0.40%, tier two to 50,000 at 0.45%, tier three to 100,000 at 0.50%, tier four to 200,000 at 0.70%) and a 150,000 USDT position:
= 80 + 135 + 250 + 350 = 815 USDT
Those rates are for illustration only. They aren't any live contract's settings.
Run the same method on today's BTCUSDT tiers for a 1,800,000 USDT position — a rough calculation from that day's public data:
= 1,500 + 1,750 + 2,000 + 1,350 = 6,600 USDT
The API also lists a deduction for each tier, a shortcut that saves adding the slices. The position sits in tier four, whose deduction is 1,500: 1,800,000 × 0.45% − 1,500 = 6,600. Same answer. Charge the whole position at 0.45% and you'd get 8,100, which only makes you cautious. Charge it all at 0.30% and you'd get 5,400. That's the version that hurts.
Even 6,600 is only the "required maintenance margin." One more item goes on top before it's compared with your margin.
The big number: where 212.64% comes from
Gate's help article gives three formulas:
- One-way mode: Maintenance Margin = Required Maintenance Margin + Estimated Liquidation Fee.
- Hedge mode: max(Long, Short) + Estimated Liquidation Fee. For what changes when you switch modes, see one-way vs hedge mode.
- Cross margin: the sum of maintenance margins for all positions. How cross and isolated share out risk is in isolated vs cross margin.
The article's second example is where the big percentage appears. Using another hypothetical table, it opens a 1,800,000 USDT BTCUSDT long at 100x and assumes a closing fee of 0.075%:
- Required maintenance margin, worked out by tier: 7,750 USDT.
- Add the estimated liquidation fee of 1,800,000 × 0.075% = 1,350, and the maintenance margin is 9,100 USDT.
- The position's initial margin is 1,800,000 ÷ 100 plus the same 1,350 fee, or 19,350 USDT.
- With nothing else in the account, the margin ratio for the position = 19,350 ÷ 9,100 = 212.64%.
The 0.075% is part of the example, not anyone's actual fee; for what futures trading really costs, see how futures fees work.
So the ratio reads as margin divided by maintenance margin. The bottom moves with position size, tier and fees. The top is the margin still standing behind the position, and unrealized losses eat into it. Liquidation comes when margin falls below what maintenance requires, which in ratio terms is the figure falling to 100% or below.
So what about a ratio of 20,000%? It means your margin is 200 times the maintenance margin. A thick cushion, yes. But it doesn't translate into how far price can move — for that you need the estimated liquidation price, derived in how liquidation price works, and triggered on the mark price rather than the last trade (mark price vs last price). Is there a "safe" level? Gate's article doesn't name one. Personally I'd watch how fast the ratio is falling; any single reading on its own says little.
Before you open, before you add, while it sinks
Before you open, look up the contract's risk-limit tiers and see which band your position falls in. For most small positions that's tier one, end of story.
Before you add, ask whether the extra size crosses a tier. If it does, the slice above the threshold carries a higher rate, the maintenance margin grows, the ratio drops, and the liquidation level creeps toward your entry. Leverage staying at the same number doesn't mean the liquidation price stayed put. Changing leverage itself moves it too — see adjusting leverage on Gate.
While the ratio sinks toward 100%, the levers are the ones the formula gives you. Make the position smaller and the required maintenance margin shrinks; Gate's help article calls this "Reduce Position". The same article lists "Cancel open orders", which frees the margin unfilled orders hold, and "Lower Leverage" for a bigger safety buffer. It also lists "Add Margin": the top of the fraction grows, though that buys time rather than fixing a bad position; adding margin on Gate covers when it's worth it. If liquidation does happen, where the money goes when you get liquidated walks through the engine step by step; if the position goes negative, bankruptcy and ADL explains who absorbs the loss.
- Gate Help Center — Maintenance margin calculation (tiered algorithm, both worked examples, one-way / hedge / cross formulas, ways to cut liquidation risk)
- Gate contract information — BTCUSDT leverage and margin (Chinese; parameter adjustments in extreme markets)
- Gate public API — BTC_USDT risk-limit tiers (snapshot used for the table and the rough calculation)